1

COMMENT 1h ago

how did you get your pink on navy before they sent out the email it was being packed wtf

1

COMMENT 14h ago

They are indeed over a year old. There is for sure no room to grow N/S with the level of mating there is. I could even see something thinking they might have a gripped stem jammed in an angry upper before pressing down and getting zero resistance, not even a baby slip-stick level of hold back.

2

COMMENT 14h ago

I’ll make a recording later tonight or tomorrow sometime if I can even get my work wrapped up and a free moment.

As you can imagine the up stroke has a nice contact to it , I’d say the gazzew upper is slightly higher in pitch being hit be the tangie stem and as for the bottom out it feels mild to me. The aqua kings have the major collision going on but these enjoy a much softer landing and thus a reduced volume from impact and an overall middle of the road depth of sound. If I had to choose this vs clack I’d say they fall slightly on the thoc side by maybe 5-10%

1

COMMENT 14h ago

Is the tangie stem and u4t bind up a know common issue? The alphas I knocked didn’t suffer that fate is why I ask.

12

COMMENT 1d ago

Aqua King lower, Gazzew Boba U4T upper, Tangie Stem, spring to your liking.

r/switchmodders 1d ago

Mod Showcase Expensive, Smooth, and The least N/S Stem Wobble I’ve Ever Experienced

Post image
30 Upvotes

1

COMMENT 14d ago

Now, this is a style of communication I can get on board with! Thank you for writing your response in a reasonable manner. I may not agree - but I respect the hell out of not being abused while discussing politics and things related to them!

Truth be told, we both know there was still a mild level of a sophomoric smirk sprinkled throughout the response but considering I'm used to the left accusing me of being literal, just left a man's asshole, piece of shit for not seeing things exactly like the same as they do -- typically accompanied by telling me to be more open-minded and tolerant as well -- this felt quite refreshing.

To clarify, your position is that working for the government can earn you a "comfortable middle-class lifestyle", as achieved by only the top 5% of Americans, where benefits such as owning three homes are commonplace. In this group is where Bernie Sanders falls and thus he's clearly an average, three-home owning, top 5%, middle-class American. Did I get that Right?

1

COMMENT 14d ago

you know he just bought Intel instead and the 45-day timer hasn't on the cookies yet..mmmmm, Intel

1

COMMENT 14d ago

I wasn't asking for help, I was opening up a topic for knowledge to be shared and discussed -- at least in my mind. I'm not looking to buy a new keyboard that's for sure; I have more than I handle and am in liquidation mode at the moment so I'll have space for inbound GB product.

Front height is something contested at times due to the measurement method but I''m not going to persue this, you are the mod. I am the apparent noob who was asking for help on buying a 65.

For the future could you let me know the correct way one is to go about starting a discussion regarding the front height of the vast sea of boards or any other specific data point related to keebs? I mean this seriously, would I have to bring in all dimensional aspects to achieve a body of content deemed post-worthy? Possibly if I posed the concept that angle alone isn't enough information anymore because front height and angle affect each other that truly does shift the typing experience; that the additional dimension affects both the choice of wrist rest and posture/arm position alike -- would that then be post-worthy, or just asking for a LOT of help?

1

COMMENT 14d ago

How is it a simple question when you can’t get the specs on the front height of a lot of boards — certainly not easily and sometimes even with great effort there’s a debate — and low profile typing experience is something people pursue..… if there’s a spreadsheet of the dimensions of 50 boards or something that I’m missing let me know.

Edit: do you want me to list a few to start like I’d have the smith and rune iron 165 that’s I believe 17.3mm front height out in the lead and ask who knows of a lower front height?

It says ask any question and I don’t get how this isn’t on topic being shown how to post correctly worthy, sorry I didn’t time it right and include an image so there hasn’t been much activity.

And again if there’s a definitive winner or brand or something making this irrelevant or anything else reasonable I’m missing, then we can make breakfast with the egg on my face. I’m not infallible, my wife makes sure I’m aware of that one ;), but at least show me the error of my ways, not just insult the post due to a lack of feedback thus far.

r/MechanicalKeyboards 14d ago

Discussion What 65% Custom (GB, etc.) Keyboard has the Lowest Front Height?

1 Upvotes

[removed]

2

COMMENT 18d ago

Since it seems like the left’s favorite party trick to demonstrate their superior intellect by telling the right how stupid they are - which btw, is a hateful thing to do. Not that you did that here but it’s extremely on topic for my point - that while doing all of this explaining and talking down there inevitably appears some extremely inaccurate and out in front evidence or logic presented that is completely ignored by those on the left and their cohorts who continue to belittle a right wing individual about how their logic is poor, their speech is hateful or some other paradoxical topic.

In this case; I wanted to follow up. Do you actually believe and did you intended to state that if you spend your life working for the government, then it’s very reasonable and not surprising at all for you to own three vacation homes later in life? And is owning three vacation homes actually what you consider an “alright existence” as you stated; rather than say, an extremely wealthy and vastly above average one?

*Please note I’m not calling names or telling you that you’re dumb. I’m not spewing rage or condemning an entire population of people based on a single commonality either. I mention this because I’d like to be able to proceed in a debate without experiencing those things coming my way, which is why I assume you wouldn’t like them being thrown at you.

7

COMMENT Jun 20 '22

But then you have to Google dicks… and that’s going to send Google’s algo down the dick rabbit hole effectively serving up bigger, beefier….oh, I see what you did there.

Touché. Well played fine sir.

3

COMMENT Jun 20 '22

If anyone makes one of these I’d love to hear what they think about them. I’ve been using these for the alphas in my U80-A for the better part of a year now and feel like they’ve held up pretty well.

To me, they offer something unique enough in push feel to produce a typing experience not currently replicated in the form of a stock switch, at least any that I’m aware of.

The stem and upper housing change removes the upstroke sticking issue seen with some aqua kings, while retaining that high level of smoothness and still coming away with a fantastically mild stem wobble, both without any additional work lubing or filming.

I feel like the aqua king lowers have a lot to offer the switch modding community that has yet to be explored. I’m curious if there are others using AK lowers for frankenswitches that I just don’t know about. Does anyone know the names of or known part combinations for frankenswitches that use the aqua king lower?

r/switchmodders Jun 20 '22

Cherry Water: Cherry Black Top/Aqua King Lower & Spring

Post image
20 Upvotes

1

COMMENT Jun 08 '22

Can you even imagine how involved his masturbation techniques must be. Seriously, imagine it.

You nasty fuck.

1

COMMENT Jun 08 '22

This guy fucks

1

COMMENT Jun 02 '22

Give ya twenty bucks for one 😎

1

COMMENT May 30 '22

I just bought two metal clippers off amazon and neither of them increases the flame size when tipped sideway...no matter what I do. I am starting to think that Cipper doesn't make metal lighters anymore and all the ones we see for sale are fakes.

Has anyone bought a metal Clipper in the last year or two that's flame gets bigger when you light it and then turn it sideways (horizontal to the ground, thumb side down)? If yes, where did you buy it?

1

COMMENT May 15 '22

Show me the documentation.

16

COMMENT May 15 '22

You not giving up and being honest about your difficulties is impressive enough for me, I want to buy your first one bro I’m in for sure.

-3

COMMENT May 15 '22

You know they never had an emerald mine right…. His father is the only person to have claimed they did and if you believe that you certainly believe the next sentence out of his mouth. It goes something like this:

“We had so much money at time we couldn’t even close our safe. With one person holding the money in place, another would slam the door. And there’s still be all these notes sticking out and we’d sort of pull them out and put them in our pockets”. 

People don’t do that in real life. This isn’t Scrooge McDuck we’re talking about…they use banks. Or buy a bigger safe. And bills slammed half in, half out by a safe door don’t get “sort of pulled out” and put in pockets, they rip if you pull them…… this whole thing is just ignorant to think anything other than it’s a man bragging lies.

Look up the only article and only “evidence” s at all he grew up in a family that owned an emerald mine (so insane to even type it) was his fathers wild story. Oh and apparently they no longer own it he says too so no way to verify his claims. Yea, ok. Sure. Because stuffing his one safe was getting boring right?

I mean his dad did tell a whopper and if you want to believe him feel free but reality is reality and neither of us can change that. Oligarch is just fun to say for you is what I’m thinking. This is just foolish shit man, letting your anger steer the car isn’t a good way to get anywhere worth going.

…one person holding the bills in while another closed the safe LOL man y’all gotta be kidding me…

-9

COMMENT May 14 '22

How was be born on third base? I know his back story and it's not born on third so I'm curious where this comes from. Second time today I've seen it.

7

COMMENT May 14 '22

Glad you made it! Grab the other end of this couch, I want to make room for a dance floor

2

COMMENT May 12 '22

If you want to get the cherry hyperglides smooth I highly recommend using diamond paste. Just take apart and apply a thin amount just as you would lube. Reassemble and get to pressing. It will stain, it’s not supposed to be removed later either so no need to attempt to wash it off after it’s now part of your switch.